주요 콘텐츠로 건너뛰기

Apple의 현재 소비자용 랩톱 MacBook Air 수리 안내서.

4186 질문 전체 보기

Re-connecting fan ribbon cable

I am trying to install a new fan but the ribbon cable is so small and flexible, I can't insert it into the ZIF socket.

Any suggestions?

Thanks

Update (08/27/2018)

I tried to do this and ended up breaking the latch while trying to pull the ribbon cable through the opening. Not happy about the result, although I think I have found a work-around

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Sorry to hear you have broken the latch.

You’ll need to get a new base connector and carefully snap it out and replace your broken latch unless you broke the connector body side in which case you’ll need to get some one with good micro soldering skills to replace the full connector.

Haven’t had any luck with work-arounds - Sorry

의견 추가하세요

답변 1개

선택된 해법

Get some electrical tape and cut it down the the width of the ribbon cable fold over one end to create a pull tab. Now place the tape onto the ribbon to give your self something to pull either in or out as needed. Then you can peel off the tape.

Don't forget the unlatch the connector first!

해당 답변은 도움이 되었습니까?

점수 3

댓글:

Close the latch after the cable is fully inserted to lock it in place.

의견 추가하세요

귀하의 답변을 추가하십시오

Steve B 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 11

전체 시간: 560