iPhone doesn't turn on but it vibrates, long screw damage?

Hello iFixit,

So this is my first question and it would be so much helpful if you could help me on this.

So yesterday I was testing parts of another phone on this one to see what the problem would be. Everything went fine I just tested the screen and reassembled it again.

So at that moment I was screwing the EMI shield to close the phone and finish the work.

Then I wanted to turn on the phone and I just saw the screen being "on" (not completely off, the screen had a dark blue color) so I made a full shutdown.

At that moment I wanted to turn on and it would not turn on, but it vibrates, it gets recognized and everything, but when I opened the phone I took the EMI shield out and the bottom left screw got stock with the hole, and the hole came with the EMI shield!

It was the 1,7mm hole so most of the cases it's the 1.2mm one but mine was the 1,7mm hole.

I would like to ask you if there's a repair for that because it's really important that I get that iphone back. All answers are welcome!

Thanks.

PS: I did not get a BSOD.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기