평판: 1
1
1
Today i replaced the home button and cable on an iPhone 6 actually the problem was home button was unresponsive only. Now fitting the new cable to the phone i found i couldn't get the phone to turn on and only disconnecting and reconnecting the battery after refitting the original cable got the phone is still unresponsive.
I run out of ideas, any suggestions from you wise people?
thanks in advance
rahul
좋은 질문 입니까?
평판: 2.2k
9
9
You cannot replace the home button on the iPhone 6. Restoring will lead the phone being completely useless.
If you still have the old home button, reinstall it. Try replacing the extension cable that goes behind the metal backplate instead.
해당 답변은 도움이 되었습니까?
Thanks for replay jake I replaced the old home button and cable Still same problem unresponsive now its fully dead I din't try restore via itune
Did you detach the battery connector before repairing?
I don't detach the battery connector before repairing
Well if the phone turned on during the repair, connecting connectors would short the components themselves. You might have shorted your home button or a components on the phone itself.
jack, can you please give me a full schematic diagram of i phone 6
평판: 209
7
1
Rahul,
Did you connect your iPhone to iTunes? If so, you may have triggered Error 53.
You can learn more here: http://ifixit.org/blog/7889/whats-up-wit...
해당 답변은 도움이 되었습니까?
Only if he restored it through iTunes.
I din't try restore via i Tunes .
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 1,856
Any one, can you please give me a full schematic diagram of my i phone 6
Hulk 의