Shows the PC desktop but "No SIgnal" won't go away either

Question

Samsung Television

Repair guides and support for your Samsung TV.

2620 질문 전체 보기

DrTachyon @drtachyon

평판: 1

1

게시일: 2016년 3월 24일

옵션

Shows the PC desktop but "No SIgnal" won't go away either

My TV always shows the HDMI (1or2) resolution, refresh rate at the top left and the big "No SIgnal" box when PC is connected. It does show the desktop too.

If there wasn't a previous input on the HDMI I can't select it when I plug the computer in. Even though it displays what it's supposed to the TV "won't recognize" there is something hooked up.

TV is Samsung model un65fh6001fxza

I unplugged it for 10 minutes and hooked it back up. - no change

Tried multiple resolutions and refresh rates - no luck w/ any of them

Tried changing input name to DVI PC and PC.

I'll update the firmware as soon as I can find one of my USB drives.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

Bojan Bilbija @bojanbilbija 평판: 479 Algoood Electronics 4 1 · Answer 1 · 2016-03-24T19:31:19-07:00

Bojan Bilbija @bojanbilbija

평판: 479

Algoood Electronics

4

1

게시일: 2016년 3월 24일

옵션

Check HDMI port on TV very closely - it might be some dirt in the connector itself - use a toothpick or very little brush and try to clean it (compressed air helps as well).

Next step is trying with new HDMI cable (some of them are even device sensitive - check picture on connector computer/TV out)

Check HDMI connector on computer side as well

Usually this kind of trouble happened when cable connector is not deep enough in HDMI socket.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

Samsung Television

Shows the PC desktop but "No SIgnal" won't go away either

답변 1개

귀하의 답변을 추가하세요