주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

Quadcopter with pre-installed camera gimbal, 4K video camera, and wireless video transmission.

46 질문 전체 보기

Camera after accident question

I have crashed my p2 vision plus, broke the ribbon cable. I have installed a new ribbon cable, made sure the sensor is lined up as per youtube video with a but of glue on the shaft.... The camera is still going crazy.

Now my question what is the correct position of the shaft that is holding the actual camera? There is a screw which holds the camera from sliding off. One side of the shaft is round and the other side is straight. The screw gets screwed into the straight part or the oval part?

What else can make the camera go out of control? I have searched, and seen every possible video online.

I have followed this video and did all steps, now everything lines up. But the camera still goes crazy. https://www.youtube.com/watch?v=Y5tUAy5U...

Please any help will be good.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

have you contacted phantom company they have great customer service, and can usually help with these issues.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Roger 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 179