기기를 수리하세요 커뮤니티 상점

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

426 질문 전체 보기

옵션

New instalment of lcd and digitiser problem

Upon installation of a new lcd and digitiser on an ipad mini 2 there seems to be a problem with the lcd touching the Base of the digitizer.

It doesn't happen straight away but over a few hours with no usage of unit.

It seems to be in the middle of the display, and nowhere near the edges.

I've changed the digitizer twice, thinking it was that, but it's still happening.

Installation had zero issues, and I've taken it out twice, but it's still happening.

Please help.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

Probably not enough adhesive between the digitizer and the LCD.

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I would suspect something pushing it out since it's in the middle, like a swollen battery.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

I did check that. The battery seems fine. Sits flat etc. It happens a good few hours after installation.

I've purchased another lcd to check if it was that.

의

댓글 달기

옵션

you might be dealing with it being bad adhesive or you're getting non genuine digitizers. if it is bad adhesive, apply your own CLEAR adhesive!!!!!!!!!!!!!!!!!!!

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I agree it's not a genuine digitizer but an aftermarket one. I've used aftermarket ones before, with no problems what so ever.

The adhesive hols the screen in fine though. There's no lifting or movement.

의

댓글 달기

귀하의 답변을 추가하세요

shaun7453 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 149