주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2310 질문 전체 보기

Keyboard issue after replace display

Hi, we just replaced the display from an iPhone 6S and found that when typing the cursor sometimes jumps into another place by itself. Everything else works fine including 3D. We tried another display, same issue. The original display works fine though. Any ideas?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Where did you get the screens from? Could be bad quality screens but I could be wrong.

의견 추가하세요

Manta(만타) 드라이버 키트

112 bits for every fix.

Upgrade Your Toolbox

Manta(만타) 드라이버 키트

Upgrade Your Toolbox

답변 4개

Sounds like you have bought a copy display, which are known for this issue.

Quality is key with this model iPhone.

You will not get this issue with original quality displays.

Possibly try:

With the new display connected.

Disconnect the battery and leave it on charge for 10 - 15 mins.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I was recently speaking to a repairer who purchased a batch of screens (he was told they were original, but they were WAY too cheap to be full original)... and every single one of them had the same issue where one side of the screen was completely unresponsive to touch.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Ghost touching on the the screen is very common with cheaper screens, the first 6s i repaired had this issue but now we have switched over to a better quality of screens and have had no problems

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Seems like the iPhone 6S replacement screens appear to have quality issues overall. I'm avoiding purchasing any replacement screen until the failure rate decreases. Correct me if I'm wrong.

의견 추가하세요

Synced repair NZ, may i ask where do you buy your orginal screen( OEM)?

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

drsmartphonedotnet 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 112