주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기
질문 마감됨

Screen black after replacement, old screen doing the same thing.

I replaced a screen on an iPhone 6 with a new screen. As soon as I plugged in the new screen, the phone buzzed. When I went to test the new screen, the screen would not turn on. I replugged in the old screen and it would not turn on either.

The phone works fine and still buzzes when hooked up to a charger or a computer. I've tried the following with no luck:

-Unplugging the battery for awhile.

-Verified that all connectors are clean and no prongs are bent.

I've been replacing screen for a long time and have never come across an issue like this before.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

선택된 답변

What kind of message do you get when plugged into iTunes?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

Well, I figured it out. When removing the cable for the screen, I somehow knocked off a small resistor on the logic board. Figured it out from YouTube with people having a similar issue. :(

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Are you sure you are plugging it correctly? If so, you might have smashed the connectors whether on the screen or the logicboard, they are very sensible. Remember not to hold the screen in 90º with the case, or you will damage the flexs.

Do you have another iPhone 6 where you can try on the LCD?

Let us know how it goes!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 67