평판: 11
1
4
I follow every single step changing the lower lcd of my nintendo, but i run into one problem. In your step #6 when you remove the three battery conections, the main battery conection, which is the small white box with the red and black wire the solder broke. Do you have the small white component or can i solder it my self. Thank you
좋은 질문 입니까?
평판: 10.2k
44
20
47
Which of these two parts did you break? The tan connector on the main board, or the white connectors with the wires?
http://guide-images.ifixit.net/igi/QuRDP...
If you broke the tan connector, you will need to replace the main board; otherwise, you will need to replace the battery board. I don't think that iFixit sells these parts, check eBay.
해당 답변은 도움이 되었습니까?
+ glad someone knows about these things ;-)
Thanks :) Actually, iFixit does normally sell the parts, but they are out of stock: the motherboard and the powerboard
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 782
