IPad Air 2 Replacement Screen Not Working

Question

iPad Air 2

Announced on October 16, 2014, the iPad Air 2 is a thinner successor to the iPad Air.

449 질문 전체 보기

Phil @oilbeefhooked

평판: 1

1

게시일: 2016년 5월 18일

옵션

IPad Air 2 Replacement Screen Not Working

I replaced my broken iPad Air 2 LCD Screen and Digitizer with a new one.

But when I tried to turn on the device, after the repair, it will not start.

I used an iOpener (heated it in microwave for 30 seconds) and a plastic spudger, and followed the teardown video. I'm not sure where I screwed up. Any help would be great.

Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.

Phil 의 2016년 5월 20일

댓글 달기

답변 2개

I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on. — Phil

Ben @benjamen50 평판: 159.7k Mtwo Perform 11 191 368 · Answer 1 · 2016-05-19T07:39:08-07:00

가장 유용한 답변

Ben @benjamen50

평판: 159.7k

Mtwo Perform

11

191

368

게시일: 2016년 5월 19일

옵션

Did you try unplugging the battery and performing a hard shut down? You can do it by holding power and home button for about 10-15 seconds.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

I tried it, but nothing happens.

Phil 의 2016년 5월 20일

댓글 달기

Phil @oilbeefhooked 평판: 1 1 · Answer 2 · 2016-07-08T22:35:40-07:00

Phil @oilbeefhooked

평판: 1

1

게시일: 2016년 7월 8일

옵션

I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 2개:

I'm about to do this repair. Does this have to soldered on to the new screen?

AppleCrack 의 2016년 7월 13일

Yes. And don't lose it.

Phil 의 2016년 7월 13일

댓글 달기

iPad Air 2

IPad Air 2 Replacement Screen Not Working

답변 2개

귀하의 답변을 추가하세요