주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2521 질문 전체 보기

Why doesnt iTunes let me restore

Hey guys

I recently replaced my iPhone 5's back housing and front panel assembly. The procedure went well, the phone was working after it and everything was fine except for the past couple of weeks I experienced weird battery drains compared to the another iPhone 5 I have laying around (mine could only hold 19hours of standby in airplane mode...).

I read some stuff online and I thought a restore can fix the problem; maybe I have an app running in the background or something.

The restore always stops at Restoring iPhone firmware... then finishes saying that the restore could not be completed error(-1).

Now my phone is not working.... Any suggestions what can be the cause of the problem or what does error(-1) mean? Any way how to fix it?

Note: I replaced the lightning port/speaker/jack assembly, and the battery as well still error -1 plus my front camera never worked, but I could restore the device before and still had this issue.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Error -1 means dead baseband, either due to a power failure or the chip has actually been damaged.

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

귀하의 답변을 추가하세요

Joseph Tafferner 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 82