주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Back Camera and LED/Flash not working

When I open the camera app, front camera works fine but when I switch to the back camera the display goes black. In the top left corner it shows the following message, "Flash is Disabled - The iPhone needs to cool down before you can use the flash." But the phones temperature feels normal.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 4개

Have you tried to replace the camera?

iPhone 5s Rear Facing Camera Replacement

If yes, try these steps:

1. Go to Options

2. General

3. Restore and select reset settings

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I have this same problem I tried to replace the back camera but it didn't solve the problem

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

You need to replace the flash module, the clue is in the error message lol. The flash module is part of the power button cable.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Hello again I haven't solved the problem yet. I don't know if this is related with the problem or not, but a few days ago I went snowboarding and I left the iPhone on the front pocket of my backpack, it got really cold and I noticed that the flash started to work again, not the camera. Once it got warm stopped. Any clues at all?

댓글 달기

If flash work when it is cold then most likley your cam is defect and you have to place a new back-camera.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Menhal Rezk 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,853