Trying to install Dual Drive
I got a Kingston 120GB SSD and I bought a Dual Drive Kit with all the tools and a cable to do the job. I was following the instructions that came with the kit, and when I tried to pull out the logic board with the appropriate toll that came with the kit, but it was very hard to make it move forward, I had to apply too much force, and only the left side moved about 2mm, but the right side don't. The impression was that the logic board was fixed in the right side. I watched the movie showing the procedure and the guy pulls the logic board forward without forcing the tool. I did not succeeded to install my SSD, I was afraid to continue and damage my Mini.
I ask, what must be happening with my logic board. If a can't pull it a little I do not be able to install my SSD.