주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

모델 A1312 / Mid 2011 / 2.7 & 3.1 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac12,2

669 질문 전체 보기

Broken some pins on the logic board

hello guys

I swapped the GPU and added an SSD but i accidently damaged some contacts on the logic board these are forconnecting the display.

here some pictures:

http://imgur.com/a/d2gun

How should I proceed

thank you

Update (06/06/2016)

Thanks for the answers I got some knowledge in soldering I should be able to do the job if the bending doesnt help

Can anybody hit me up with a link where I can buy this part?

Thanks

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 2개

가장 유용한 답변

If they're just bent (I can't tell for sure because the picture is a bit blurry) I would recommend using something like a small flathead screwdriver and gently attempting to straighten them. If you get it close enough, the cable should mate to the connector without much issue. Those look like they're just contacts and not pins so they don't need to be perfectly straight. According to what I've read those pins are for display power so they're pretty important.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

You'll need to find someone to replace the connector for you. As they say plumbers can't do brain surgery, don't feel bad I'm a plumber too! ;-}

The only other option is to see if you can get a replacement logic board but that will be costly too.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

pulac77 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 185