주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Ear peice and proximity sensor not working

I replaced the headphone jack on my iPhone because I was not getting a good connection to various headphones. In putting it back together I must have not connected connector 3 correctly. I have tried a number of times to reconnect it. Does anyone have a photo of what it should look like or any suggestions as to what I may be doing wrong? If not what is my next step?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 5개

선택된 답변

Could be your connector? It is hard to notice, but sometimes they break and lift off the board slightly.

http://hectordtruong.blogspot.com/

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

Here's a pic (the model in the pic is a 3GS, but the connector is the same in this instance):

Block Image

It has a gold tip that should be completely in the connector. Make sure the locking bar is down once the gold tip is in there.

Have you tried restoring it, or can you not get that far?

If that doesn't fix the problem, it seems that the front panel/digitizer is broken.

If THAT doesn't fix the problem, all signs point to logic board.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

댓글 달기

I Must have knicked the #3 cable while putting it back together. I too purchased a new cable, and although it is not the easiest thing to replace I did do it and now everything works wonderfully.

해당 답변은 도움이 되었습니까?

점수 2

댓글 3개:

+great! now you can accept your own answer

+ (You forgot your tick pollytintop)

oops, thought it went on.

댓글 달기

Might not be the logic board. That ribbon cable is fickle. I ahd this problem and just bought the cable (proximity sensor cable) off of amazon and replaced it. There's a youtube video on how to do it (since it's not immediately obvious), and it's an easy repair.

Also, remember to always shut off your phone before you open it. Seems that the proximity sensor or the cable may be especially sensitive to that.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

댓글 달기

dam im such an idiot i was trying to lift the white part of the connector and not the black thing and i then chipped abit of the white part but it has not tottally fallen off and the ribbon still fits in there thankfully but i guess its damaged and now i know how to fix it properly

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Scott 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 7,893