옵션

After water damage no function but board seems working.

Hi guys,

I am repairing an iPhone of a friend and I now faced a problem I'm not familiar with.

Short version:

Phone remained in a jacket outside during rain. Since then no function. I opened up the phone but there was no corrosion visible. I put the board into my iPhone 6 and run it. Since it turned on the board should be okay.

I tried to find defect parts by exchanging them. I put a new battery, power button cable, lightning dock cable and volume buttons cable in. But still no reaction. Neither by pressing the power button nor by plugging in the USB cable. Even iTunes keeps silent.

Does someone of you know any component that be causing the defect I not exchanged, yet? Or could the housing cause the problem? I'm like 404...I'm thankful for every further idea :)

Chris.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2016년 6월 9일

옵션

If you have access to another phone as you say you tried the board in another phone try testing the display. Water damage is not restricted to the board .

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 3개:

Oh I didn't mentioned but as I switched the board I also used the display of the "damaged" phone. The display should be okay as well.

chris9211 의 2016년 6월 9일

so the display and the logic board both worked in another phone? connected together in that phone?

Jimfixer 의 2016년 6월 9일

yes. both worked in my phone.

chris9211 의 2016년 6월 9일

댓글 달기

iPhone 6

After water damage no function but board seems working.

답변 1개

귀하의 답변을 추가하세요