평판: 13
2
i bought a wifi nic card for the xbox one. replaced my old non working card but i still get the "there is a hardware problem" when trying to set my xbox up. i reset the xbox so i dont know if there is a way to bypass the start up screen.
I really want this to work.
before resetting the console i was able to use ethernet. now i cant use any of it
좋은 질문 입니까?
평판: 271
8
2
2
I've had the same problem. In one I repaired the RF rol board was bad. Another one the customer had tried to repair and where the Wifi antenna plugged into the RF board was pulled loose.
Also make sure the WiFi card and the cable connection to the Mobo are pushed in all the way.
Hope you have already figured it out, please let me know if you did and what you did to repair it.
해당 답변은 도움이 되었습니까?
I replaced both the rf rol board and wifi board and no difference. While i had it opened the second time i had fully disassembled it and everything was plugged in properly but no go on any of it. Ended up just getting rid of it on ebay and picking up another xbox on ebay.
24 시간 전: 0
7일 전: 0
30일 전: 1
전체 시간: 195
