Ipad 4 Digitizer connector repair

Question

iPad 4 GSM

GSM version of the fourth generation of iPad released November 2, 2012. Model Number A1459 / 16, 32, or 64 GB

43 질문 전체 보기

Hatem Japo @hatemjapo

평판: 25

3

게시일: 2016년 6월 12일

옵션

Ipad 4 Digitizer connector repair

Hello

My ipad had b broken digitizer so i bought a new one and wanted to repair it myself. Unfortunately i damaged one of the digitizer connectors on the mainboard.

I ordered one connector and now i am trying to bring it on the board.

I have successfully taken down the old broken connector, but i got problems attaching the new one.

After taking it down, i see 2 lines which connects the connector to the mainboard.

The top line looks different than the one on the bottom. On the bottom i can see pins ranging over. But on top there is no pins.

Do i have to remove the pins on the bottom so both are on the same level or does both lines look different?

I can also show you a picture if you cant understand what i mean

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 3개:

Definitely show a picture.

Rany 의 2016년 6월 12일

Post a pic please. I was with you up until the pins parts. This is a pretty straight forward soldering job, so it shouldn't be too hard to get back working.

Josh W 의 2016년 9월 20일

Hello,

I also broken digitizer connector of my ipad4 and I need to buy new one. Where you bought it?

pacbox 의 2016년 9월 20일

댓글 달기

답변 1개

Post a pic please. I was with you up until the pins parts. This is a pretty straight forward soldering job, so it shouldn't be too hard to get back working. — Josh W
Hello,

I also broken digitizer connector of my ipad4 and I need to buy new one. Where you bought it? — pacbox

Nick Kane @smashedit 평판: 1k smashedit.co.nz 12 2 · Answer 1 · 2016-06-12T15:23:03-07:00

Nick Kane @smashedit

평판: 1k

smashedit.co.nz

12

2

게시일: 2016년 6월 12일

옵션

I dont mean to be rude but if you damaged the connector during a repair you have little chance of attaching a new one which needs to be soldered back on and requires some serious micro soldering skill. Take it to a local PCD specialist along with the new connector. The only exception to this is if the top latch has come off, you can fit a new latch by inserting it at the open position and fix it by closing it, now it should be fixed in and can open / close normally.

해당 답변은 도움이 되었습니까?

예 아니요

점수 -2

댓글 1개:

Relax man. We all make mistakes. I break stuff every single day. Does that mean that I"m incompetent?

No. It means I'm human.

Plus...the IP4 digi connectors suck. They are brittle, way more delicate than any other connector I have ever touched. I've broken them. I have no doubt that I will break more in the future. It happens.

Josh W 의 2016년 9월 20일

댓글 달기

iPad 4 GSM

Ipad 4 Digitizer connector repair

답변 1개

귀하의 답변을 추가하세요