주요 콘텐츠로 건너뛰기

모델 A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, 또는 3.06 GHz Core 2 Duo 프로세서

433 질문 전체 보기

How to replace wire which goes to power supply

I was replacing the power supply and the sensitive wire broke into pieces, now what do I do to replace that? There are 3 wires that go to the power supply, the other 2 have clips which make it easy to remove, but that small delicate wire just broke into pieces when I tried to take it out. Any sugesstions? Where can I find a piece like this. I'm thinking of looking through some old laptop parts that I have and see If I can find something. I would appreciate any help.

thank you

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

선택된 답변

Can you send a pic of the wire you need? I might have one.

해당 답변은 도움이 되었습니까?

점수 1

댓글 8개:

http://www.ebay.com/itm/922-7781-593-035...

Try that link and see is that the part you are looking for, if not let me know and I will find the correct part needed.

That's not the one Michael. I'm sending a pic now.

I believe the cable you need actually have other cables build with it, they are attached to other hardware components, and if so I think this might be the one you need.

That's the cable you will need, I have that same iMac here in my shop and I looked at it and that is the correct cable. If you want you can ship it to us and we can do the repair for you.

댓글 3개 더보기

댓글 달기

Block Image

Block Image

these are the pics of the wire and power supply. thanks Michael.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Can you send a pic of the other end of the cable of where it leads to? Sorry, I just want to make sure I find the correct one!

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

댓글 달기

귀하의 답변을 추가하세요

Frank Barretto 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 98