기기를 수리하세요 커뮤니티 상점

iPhone을 직접 수리하는데 필요한 모든 것! iFixit에는 모든 iPhone의 무료 수리 안내서 및 분해 정보는 물론 은하계 최고의 교체 부품 및 도구가 있습니다.

36447 질문 전체 보기

옵션

iPhone 6 after screen replacement doesnt turns on but enters in DFU

Recently, I have replaced an iPhone 6 screen the phone turned on but suddenly the image became distorted. I thought it was a screen problem and replaced by another screen. Now the phone just don´t turn on. Usually after replacing the screen the phone turns on but the screen remain black. The fix is usually just remove and put back the battery. But this iPhone just DONT TURN ON (doesnt even appear in iTunes). I have did everything. The phone only enters in DFU mode. I tried to restore the phone in DFU but it get stuck in "Waiting for iPhone".

Please help! It´s a clients iPhone and I am very upset because Ill have to pay him another phone.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2

댓글 1개:

It turned out was the battery. Somehow I touched it and it fast discharged. I tested it with multimeter and it was dead. But anyway thanks @sirfixalot24434 for the help.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

This normally doesnt happen but it sounds to me like the mother board got shocked. This can be caused by not turning the phone off before starting to work on it. Thats really the only way it can happen. The next thing you can try is just taking it to apple. Dont even mention that you took the phone apart. Just tell them it just happened. Since its a customers phone, you really dont have any other choice if you dont want to buy them a new phone. If you are not around an apple store, then call them up and explain the situation, they might let you send it in so they can look at it. Hope this was helpfull.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Marcos Lisboa 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 92