기기를 수리하세요 커뮤니티 상점

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

옵션

Glass replacement - home button resistance on push

Hi everyone,

Recently I replaced the glass on two iPhones 3GS. But every time, the home buttons feels a bit stuck. They don't 'click' anymore. It feels like there is some resistance. Does anybody have experienced the same problem? If so, is there a solution?

Thanks,

naf

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

I think set up is the same as 3g...open display up again, turn over and have a look at the 2 gold prongs on back of home button, sometimes they get flattened during taking apart. just slide a flathead screw driver under and lift slightly. just be gentle as they break easily (learned the hard way)also clean top of dock where they make connection.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 3개:

Thanks, but I don't have any problems with home buttons not working. The home buttons just don't make the 'click' sound when I press on them. They don't feel as smooth as before. It feels like they aren't fitted well.

의

nope, it still works it just takes more pressure? this sorted it for me several times.

의

Indeed, it takes more pressure. It feels like they are a bit stuck. How do I resolve this problem?

의

댓글 달기

귀하의 답변을 추가하세요

naf 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,594