주요 콘텐츠로 건너뛰기

7.9 inch display / Model A1455 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

30 질문 전체 보기

change the powerport and headphone jacket

I have an ide, but i will need some help....

i have the first ipad mini, and i think of putting the in my car, will 3d print a nice stand for it, but i will have som issues white the power and headphone, that need to go on the long side of the ipad. is it possible, i havet open a ipad mini, so don't know if i can just move them and make a new hole in the chassi

do u have any good information, pleas writ some lines down:)

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Daniel Berntsson there is not enough room to change the design. the headphone jack etc. use flat ribbon cables that would need to be redsigned to move the jack anywhere but where it currently is. Check this out. You may have to incorporated the current location into your design. It will be a lot easier than what you are currently thinking off.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

mmmm now i have an other ide....

1. can i use the ipad.. hardware... and change the screen, for a 7" insted of the 7.9"?

2-. is it possebol to mirror the phone to an ipad.. and use the 7"scrren to navi in the iphone?

댓글 달기

귀하의 답변을 추가하세요

Daniel Berntsson 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 58