기기를 수리하세요 커뮤니티 상점

Apple's 6th revision to the iPod Touch lineup, released in July 2015.

149 질문 전체 보기

옵션

Screen replacement did not work

I just finished replacing my cracked screen. Purchased the screen/digitizer through iFixit. The device turns on. The Home Button also works, but nothing happens when I touch the screen, which means I can't "slide" anything. There are also double vertical lines across the entire screen. Followed step by step! What did I do? Nothing ripped during replacement. I'm so afraid to attempt to pry open new screen to look around. I don't want to bust my new one! Any tips/hints would be greatly appreciated! Can't seem to find anything in the answers section pertaining to this issue -- just a white screen, which I don't have.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Hey Jaime Friel,

Have you already tried a Hard Reset? Hold the home button + power button at the same time for like 5 secconds. Your iPod will reboot and maybe this works.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 3개:

Unfortunately, I already tried that. Nothing.

의

Than you just need to heat the screen and try to take it out. It will not break, but just apply enough heat.

의

Maybe one of the cables is bent to the wrong way or something like that.

의

댓글 달기

귀하의 답변을 추가하세요

Jaime Friel 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 74