The machine does not fill, water goes directly to drain

Question

Kenmore 90 Series Washing Machine

The Kenmore 90 Series is a washing machine manufactured by Kenmore.

266 질문 전체 보기

Rod @rodzap

평판: 13

1

게시일: 2016년 7월 18일

옵션

The machine does not fill, water goes directly to drain

During the beginning stage it begins to pour water in, however it continues to do so non stop, and the water goes directly down the drain staying endlessly in the same process. What to do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 2개

선택된 답변

mayer @mayer

평판: 685.3k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2016년 7월 18일

옵션

Your washer may be syphoning. Make sure the drain hose isn't inserted too far down the standpipe, or that the drain hose height isn't below the water level. Is this something that has developed recently? Did it ever work correctly?

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

Thanks for your response. This is actually something that developed recently. I'll try to raise the drain hose, because I think you might be on to something. I think the problem might be since I moved. I'll change the height and let you know what happens. Thanks again.

Rod 의 2016년 7월 18일

I have similar problem with my "LG Intello wash" model washing machine, but I found that once we start the machine, drain valve continuously in open condition as it is getting supply from control board to drain SOV, I have checked drain valve function by removing SOV supply and found its working fine and no leak at all

But I need to know why drain vale supply is coming continuously from main control board & opening the valve, instead closing initially ?

Raja 의 2016년 9월 9일

댓글 달기

Thanks for your response. This is actually something that developed recently. I'll try to raise the drain hose, because I think you might be on to something. I think the problem might be since I moved. I'll change the height and let you know what happens. Thanks again. — Rod
I have similar problem with my "LG Intello wash" model washing machine, but I found that once we start the machine, drain valve continuously in open condition as it is getting supply from control board to drain SOV, I have checked drain valve function by removing SOV supply and found its working fine and no leak at all

But I need to know why drain vale supply is coming continuously from main control board & opening the valve, instead closing initially ? — Raja