주요 콘텐츠로 건너뛰기

Released on November 22, 2005, the Xbox 360 wireless controller is the primary game controller for the Microsoft's Xbox 360 home video game console.

90 질문 전체 보기

I replaced my shell and now sync doesn't work.

I bought some new skins for my Xbox 360 controllers to make them look cool and i had a lot of trouble getting the sync button in when i push in the PCB the sync button wont lign up right. I read that i could shave the bottom of the button and it would work. any other ideas before i alter it so i don't mess it up? also any ideas on how to shave it in case there isn't a better idea. should i use sand paper or an Xacto knife?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

So, i fixed it on three controllers. I just took it back apart and used my Xacto knife to shave a little bit off. If you have this problem be very careful and make sure you don't take too much off

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Trevo Vance 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 61