주요 콘텐츠로 건너뛰기

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 질문 전체 보기

Replaced Screen after working initially the screen went black

Replaced Screen in IPad Mini everything was working fine. The battery was at 4% so I put it on charge and about 10 minutes later I checked it and it will not power on.

Any suggestions?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Hi Travis I take it you left it on charge for a while you can redo again to see check connections possible a faulty screen turn it on with the screen still loose in case its impeded when housed,remove battery(if possible) and try again no real way of checking as they are the devil to test unless you had same model again to swap it was old screen working at all will it still work back in again..sorry its a case of elimination which is a pain..

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I opened the I pad again. And disconnected the cables, reconnected the cables, then reinstall everything. And it powered on. Thanks for your input.

댓글 달기

귀하의 답변을 추가하세요

Travis Todd 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 45