주요 콘텐츠로 건너뛰기

iPhone을 직접 수리하는데 필요한 모든 것! iFixit에는 모든 iPhone의 무료 수리 안내서 및 분해 정보는 물론 은하계 최고의 교체 부품 및 도구가 있습니다.

36388 질문 전체 보기

Are screws required for testing iPhones

After removing a logic board on any iPhone to do some repair work, is it essential that all the screws be back in the phone to perform testing?

I'm curious, because we've been getting into iPhone repair, and when we're re-assembling the phones, we've been running tests without all the screws holding the logic board in to make it easier to remove if we need to.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

Its smart to put all the screws back before connecting the battery. Some serve as grounds.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

I thought that might be the case, because we've been getting some weird screen issues with crazy lines in them. So we started putting screws back in, but wanted to see if there was any specific reason. thanks!

댓글 달기

No there not i fix all phones but with all the iphones i do about 10 a day some times less but i take the logicboard out and the sheilds off but i do tape the back off before i put the logicboard in and the top screw to test that ive fixed the problem and if not i take apart remove the chip replace and try again untill i get it right then once its done and checked then i put all the sheids back in and put all the screws back in place them put all together and one last check then back to the customer,? But if you not confident on what your doing then always put everything back were it came from,?

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

thanks for that!

No you put all the connections on then the phone will work fine with out screws to test then if fine put all the screws in the exact place they came from,?

댓글 달기

귀하의 답변을 추가하세요

dollartripclub 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 168