Black camera after display repair.

Question

iPhone 6s

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2687 질문 전체 보기

Federico Vaccaro @omgplshold

평판: 25

2

게시일: 2016년 9월 14일

옵션

Black camera after display repair.

Hi, i just dropped my 64gb iPhone 6s and broke screen + lcd, when i repaired it my camera started to show a black screen and i'm unable to switch between front/rear cameras and use flash.

I bought a new original apple camera and changed with the old one, it didn't worked,

could the problem be the power management ic of the camera? If the anwer is yes how can i repair it?

Is still the u2301 from iPhone 6?

Thank you in advance for the answers, have a good day.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 2

댓글 5개

Was the battery unplugged during the whole process of the repair? If not then you may have shorted the camera ic chip on accident when removing / plugging in the screen ribbon cables.

Ben 의 2016년 9월 14일

it was not, i forgot sadly... this is the reason that make me guess is the ic, do you know the exact component name/location on the board? since i'm not able to find it on the net...

Federico Vaccaro 의 2016년 9월 14일

Some leads? i have no clue how to repair this :(

Federico Vaccaro 의 2016년 9월 15일

I have no info on where it is on the 6s unfortunately.

Ben 의 2016년 9월 15일

I will try it hoping is the u2301 even in the 6S model.

U2301 is for the 6 i guess.

Federico Vaccaro 의 2016년 9월 15일

댓글 달기

답변 2개

Was the battery unplugged during the whole process of the repair? If not then you may have shorted the camera ic chip on accident when removing / plugging in the screen ribbon cables. — Ben
it was not, i forgot sadly... this is the reason that make me guess is the ic, do you know the exact component name/location on the board? since i'm not able to find it on the net... — Federico Vaccaro
I will try it hoping is the u2301 even in the 6S model.

U2301 is for the 6 i guess. — Federico Vaccaro

Buddhika Mahesh @buddhikamahesh 평판: 15.1k 13 39 16 · Answer 1 · 2016-09-15T05:40:57-07:00

가장 유용한 답변

Buddhika Mahesh @buddhikamahesh

평판: 15.1k

13

39

16

게시일: 2016년 9월 15일

옵션

Hello Federico Vaccaro,

Inspect whether any component missing the near FPC connector

* Check the IC U2301 output & it should be 2.8V. if it is OK suggesting you to clean the FPC connector on logic board and carefully resolder it (micro soldering skills required)

Hope this answer will help you to fix the camera issue on your iphone. Good luck!

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 3개:

I will try it hoping is the u2301 even in the 6S model.

Federico Vaccaro 의 2016년 9월 15일

Federico. Did you solve the problem. Because I have the same issue.

Jchap808 의 2016년 9월 19일

i do too. where do i get replacement IC's for this?

Bev 의 2016년 11월 4일

댓글 달기