주요 콘텐츠로 건너뛰기

대부분의 태블릿 컴퓨터 수리. 태블릿은 크기가 작고 빈번한 접착제 사용으로 인하여 태블릿 수리는 노트북 수리보다 더 까다롭습니다,

18849 질문 전체 보기

How many celsius shuold be the heat gun setting?

Hi there.

I have chinese heat gun. it is part of the YaXun 881D.

My question is how many to be the celsius temperature for removing adhesive when replacing digitizers/LCDs?

I want approximately value.

The reason i am asking because i don`t want to this thing 2 hours but the display should stay healthy.

The heat gun setting begins from 100 C

Thanks in advance

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

I personally go halfway on the dial. I have no idea what that exact temp is since my gun just has +/-. The exact temp is really not important. It only needs to get hot enough to loosen the adhesive, which should be around 100F.

My method for doing tablets is pretty simple:

start at one corner and heat up the glass along both edges until its hot to the touch. Not warm, not scalding, just hot. Then I start prying up the glass from that corner. When it starts getting tough again, I heat up from that point to the next corner. I keep repeating until all the glass is up.

You will never find 2 techs who use the same temp settings on anything. We all have our own way of doing things and different tools. Heck...I still have no idea what temp setting I use for hot air rework. I also don't care.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Did you make mistake when you tape 100 Fahrenheit? Do you mean 100 C?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

whatever460 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 106