Does anyone know what screw these hadphones use?

I have some Marley Liberate XLBT Headphones where one of the screws came out of the the side. Not sure how. I was told to that I would need an 1.5mm Allen Wrench but I don't know where to find the screws that are used by that. Any help would be great. Even the name of the screws.

I tried contacting them but they didn't know and sending in warranty information its been over a week and no response...

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오

4개의 답변

선택된 해법

Search Amazon for liberate Marley replacement screws, it comes with a driver. This happened to me on Wednesday. I don't have a 1.5mm Allen driver so $15CDN all in is probably (my) solution. But also I'm a cheap guy so hobby shop might just get me fixed up for less than that.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Try your local hobby shop. They carry a ton of tiny, allen head screws. Drones and RC vehicles use them and they are always wiggling out. I'd bring your headphones in and see what they have that will fit.

Otherwise, pull the screw out of the other side and measure its total length, pitch and head size. Then you can order one from any of the hobby websites.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

@asura Did you have any luck with this?

해당 답변은 도움이 되었습니까?

점수 0

댓글:

The comment above is what helped. I'm going to have to order it because for some reason these screws continually come undone

의 답변

Number 2 machine screws.

의 답변

의견 추가하세요

I used M2 3mm screws and they worked fine.

https://au.rs-online.com/mobile/c/fasten...

Some threadlocker eg Loctite 243 might also help. Take care with it as it may strip paint or damage plastic parts.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Greg K 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 7

지난 7일: 19

지난 30일: 83

전체 시간: 2,846