주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2170 질문 전체 보기

No video, no sound and no touch response after screen replacement

After replacing the screen of a working iPhone 4s with broken glass, taking care to disassemble and reassemble the smartphone with the greatest attention, the device has no video, no sound and no touchscreen response. By connecting to a PC, I can note that the device "works": the operating system starts up without problems. Watching mainboard under a microscope I noticed an unsoldered pin on the LCD connector, as shown in the video:

https://www.youtube.com/watch?v=Tn2mUIEI...

Someone is the same thing happened ?? I'm in trouble and I would kindly need your advice on how to proceed. I'm provided with sealing station and motherboard's spare parts, but do not know which components are damaged. Please help! Thanks in advance, elnano.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Hi,

is it the upper left pin?

perhaps there is helping a little bit of solder???

Good luck

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Yes, it is! I will try to solder it and i'll update you!

Thanks for your reply!

댓글 달기

귀하의 답변을 추가하세요

Alberto 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 39