Glass replaced but screen not working now (backlight is)

Question

iPad Mini 2nd Generation

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

426 질문 전체 보기

Will Dawson @wdawson001

평판: 13

1

게시일: 2016년 9월 23일

옵션

Glass replaced but screen not working now (backlight is)

I've followed the instructions to replace the glass screen perfectly, but now the screen doesn't display anything.

I can see the back light is working when I press the power button, but no picture is actually shown. The ipad mini also acts like its working (will lock and unlock and is detected by itunes)

I have hard reset and restored the software. Any other suggestions?

Thanks in advance

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

score 3 · Answer 1 · 2016-09-23T13:06:03-07:00

가장 유용한 답변

GadgetERService @gadgeterservice

평판: 1.6k

Gadget ER Service, LLC

12

5

3

게시일: 2016년 9월 23일

옵션

You may have damaged the LCD/Backlight flex cable when removing it from the frame, or quite possibly damaged the backlight filter on the board. I would first order in a new LCD/backlight from iFixit and test that. If it still doesn't work, it's a board issue.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 2개:

Would the backlight be working if the cable was damaged?

I saw the posts the the backlight filter solutions, but I presumed that the backlight wouldn't work if this was the issue.

Will Dawson 의 2016년 9월 23일

Check this out: Th screen stays black after a digitizer replacement..

GadgetERService 의 2016년 9월 23일

댓글 달기

iPad Mini 2nd Generation

Glass replaced but screen not working now (backlight is)

답변 1개

귀하의 답변을 추가하세요