주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

294 질문 전체 보기

Instructions for replacing home button are incomplete

The instructions for replacing a home button include a step where I have to remove the SIM card. My verizon phone doesn't use a sim card. The functionality is implemented in a different way.

Does someone have instructions or experience for THIS type of phone?

If not, can I proceed past this point?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Are you sure this phone isn't a 4S?

Fairly sure. Here is the A number

A1349

I am using the instruction video on the ifixit website

iPhone 4 Home Button Replacement

I also noticed a few other differences that I think I worked out.

There was a metal clip near the battery connection of the video that just popped out.

In my phone, Ihad to unscrew a different screw and the piece as shaped differently.

Fortunately, I was taking pictures as I went, and was able to get the piece back in.

When I hit the SIM problem, I stopped reversed my steps and put the phone back together. It still worked so I am ready to try again when I am sure about the SIM step.

Thanks

Sam

There is a set of guides for this type of phone, its the iphone 4 cdma.

댓글 달기

답변 1개

선택된 해법

@skoski not quite sure which instructions you are using and/or what phone you have. Yes you can safely proceed past this point if you do not have a SIM. Let us know what exact phone you have....on an iPhone the AXXXX number will help us.

Update (10/01/2016)

@skoski the guide you are using is for the GSM Model A1332 for your CDMA A1349 use this guide. that explains why you had different screws and why it looked different:-)

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Fairly sure. Here is the A number

A1349

I am using the instruction video on the ifixit website

iPhone 4 Home Button Replacement

I also noticed a few other differences that I think I worked out.

There was a metal clip near the battery connection of the video that just popped out.

In my phone, Ihad to unscrew a different screw and the piece as shaped differently.

Fortunately, I was taking pictures as I went, and was able to get the piece back in.

When I hit the SIM problem, I stopped reversed my steps and put the phone back together. It still worked so I am ready to try again when I am sure about the SIM step.

Thanks

Sam

댓글 달기

귀하의 답변을 추가하세요

A S Koski 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 58