주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

294 질문 전체 보기

installing a new home button

I followed the 39 steps to replacing the home button in an iphone 4

When I finally got the step 39, I was a little dismayed.

There is really not any good final steps to finish the repair.

Does anyone have good pictures and/or description of seating the ribbon cable, positioning the switch?

Some questions

1. How can I be sure that when a removed the original cable, I got it all?

2. How far should the new cable be inserted into the opening for the connection?

Both the ifixit video and several others on line, get to the point of removing the ribbon cable and then stop.

Any help or hints will be appreciated.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Hi,

don´t be afraid. you have to open the little connector and pull out the cable.

After reinstall only put the cable in till the golden contacts are gone.

Close the connector, done ;)

Hope helped you

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

A S Koski 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 38