Glass front replacement, separated LCD accidentally

Question

iPhone 6s

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2688 질문 전체 보기

xternalhunter @xternalhunter

평판: 1

1

게시일: 2016년 10월 20일

옵션

Glass front replacement, separated LCD accidentally

Hi guys

I tried to do glass swap on my iPhone 6S and all was going well until I accidentally removed the white panel from the back of the LCD, rather than take the whole LCD off which is a real pain.

Can this be fixed or resolved?

I have since removed the whole lot, but it appears almost as though there are lines now on the foil area backing, almost like it's cracked below.

I can't seem to get the phone to power on either, and before it worked 100% of the time.

Many thanks for your help

Rob

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

Josh W @joshw

평판: 12.1k

11

28

6

게시일: 2016년 10월 20일

옵션

Your best bet is to buy a replacement screen assembly from a reputable retailer.

Glass only is a terrible idea, especially on an iPhone 6S. Its never going to look right and chances are it won't act right either. You separated the backlight from the LCD and it sounds like you also broke the backlight. As far as the power issue, did you disconnect the battery before disconnecting the screen?

해당 답변은 도움이 되었습니까?

예 아니요

점수 4

댓글 6개:

Thanks for your help with this mate - do you know a good place to source a 6s lcd display? They see to be a load more expensive than the 6 ones from what I have found so far.

I did disconnect the battery, and reconnected it after - but no joy...

Any ideas?

xternalhunter 의 2016년 10월 20일

[연계 제품이 누락 또는 비활성화 됨: IF314-037-3]

Need to get the display working again to troubleshoot, but more than likely it just needs a hard reboot.

Josh W 의 2016년 10월 20일

Fair, ok. Shouldn't the phone still power on even if the display doesn't work or is connected, so it would vibrate or something? Can I reset via USB? I connected the button again but couldnt get it to reboot either.

xternalhunter 의 2016년 10월 20일

A iPhone should still be detected via iTunes / Computer even if there is no screen connected.

It should be able to still boot up and respond to plug in on charge / silent + vibrate switch if it is on.

Ben 의 2016년 10월 20일

Thanks Ben. Is it safe to attach the battery without the screen connected?

xternalhunter 의 2016년 10월 20일

댓글 1개 더보기

댓글 달기

Thanks for your help with this mate - do you know a good place to source a 6s lcd display? They see to be a load more expensive than the 6 ones from what I have found so far.

I did disconnect the battery, and reconnected it after - but no joy...

Any ideas? — xternalhunter
[연계 제품이 누락 또는 비활성화 됨: IF314-037-3]

Need to get the display working again to troubleshoot, but more than likely it just needs a hard reboot. — Josh W
Fair, ok. Shouldn't the phone still power on even if the display doesn't work or is connected, so it would vibrate or something? Can I reset via USB? I connected the button again but couldnt get it to reboot either. — xternalhunter
A iPhone should still be detected via iTunes / Computer even if there is no screen connected.

It should be able to still boot up and respond to plug in on charge / silent + vibrate switch if it is on. — Ben
Thanks Ben. Is it safe to attach the battery without the screen connected? — xternalhunter

iPhone 6s

Glass front replacement, separated LCD accidentally

답변 1개

귀하의 답변을 추가하세요