주요 콘텐츠로 건너뛰기

2011년 하반기 모델, A1278 / 2.4 GHz i5 또는 2.8GHz i7 프로세서.

591 질문 전체 보기

Wont sleep when closing the lid

My macbook pro won't turn off when closing the lid, i guess there is a missing magnet inside the computer with i found in one of my screwdrivers after a repair but i don't know where to place it. It's an small and rounded magnet. I have tried anything related to software even wiping my mac.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

가장 유용한 답변

Did you resolve? Likely to be the Hall Effect or Reed Switch that is situated on the left side of the laptop on my 2012 Pro Retina. The magnet on mine is in the lid. If you have had the lid apart then that will be where the magnet goes. Try placing a magnet around the keyboard perimeter and see if it goes to sleep with it in some place (others have found that putting a phone case with a magnet by the side of the laptop has caused theirs to go into sleep mode). If it does go to sleep then your mysterious magnet will be the problem. If not, then the sensor itself may be at fault

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Do you have Internet Sharing turned on in your Sharing System Preferences?

If you have it on, the Mac is set to never sleep.

There are other things you can try on this Apple Support document; but the first one I mention is not directly listed.

Apple: If your Mac doesn‘t sleep or wake when expected

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Alonso del Rio 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 527