Inner screen and keyboard don't work

Question

PowerBook G4 Aluminum 12" 1-1.5 GHz

모델 A1010 or A1104

99 질문 전체 보기

Alexis Silent @alexissilent

평판: 1

1

게시일: 2010년 10월 30일

옵션

Inner screen and keyboard don't work

I've got Powerbook G4 12", that works normally with the external screen - but inner screen shows nothing. Inner screen is checked - and fully working. Powerbook starts, chimes, then screen flickers a bit - but stays black. I though, that it's hall effect sensor - but I checked it, DC-DC Board - everything works fine.

Suddenly I checked system properties - and found out, that it thinks that notebook is closed.

Also I found out, that inner keyboard worked fine, but is not working anymore - with screen at once. Keyboard is 100% working - I checked it on the other logic board.

I already compared this logic board with working one - but found nothing. I think that some single little part is shorted or out of order - but I can't find anything. What is needed to be checked first?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

선택된 답변

mayer @mayer

평판: 685.4k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2010년 10월 30일

옵션

Here's how to install your Hall Effect Sensor: PowerBook G4 Aluminum 12" 1-1.5 GHz Hall Effect Sensor Replacement

Here's the part you need to replace: [연계 제품이 누락 또는 비활성화 됨: IF153-003]

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 6개:

agreed +

rj713 의 2010년 10월 30일

I've wrote, that hall effect sensor is checked and works fine on other Powerbook.

Alexis Silent 의 2010년 10월 31일

I replaced DC-DC board and Hall Effect sensor - and situation is the same. I want to find out, what component on logic board is responsible for this behavior - and replace it.

Alexis Silent 의 2010년 10월 31일

Does it still think that the unit is closed?

mayer 의 2010년 10월 31일

OK, I'll try to explain current situation once more time: I took out my logic board and placed fully working DC-DC board and Hall Effect sensor on it. Powerbook boots into OS X, I can see it on external screen. It is still written, that it's closed in system properties. Inner screen and keyboard still don't work, all of these parts 100% work on other same Powerbook.

The only suggestion is that I made something with logic board - shorted some element of cracked it. I can't say it with sure, because I was careful - and don't remember any problems. Anyway, I want to find what component on logic board is responsible for "closed lid" and to replace it. I'm searching for PB G4 DVI datasheet over internet for two weeks, but still've got nothing. Only thing, that I found - is the Service Manual with How-To-Disassemble-And-What-To-Change-If... :(

I'm sure, that my problem is stupid and silly - and I can fix it with a solder iron in two minutes... if I knew what to solder :)

Alexis Silent 의 2010년 11월 1일

댓글 1개 더보기

댓글 달기

I've wrote, that hall effect sensor is checked and works fine on other Powerbook. — Alexis Silent
I replaced DC-DC board and Hall Effect sensor - and situation is the same. I want to find out, what component on logic board is responsible for this behavior - and replace it. — Alexis Silent
OK, I'll try to explain current situation once more time: I took out my logic board and placed fully working DC-DC board and Hall Effect sensor on it. Powerbook boots into OS X, I can see it on external screen. It is still written, that it's closed in system properties. Inner screen and keyboard still don't work, all of these parts 100% work on other same Powerbook.

The only suggestion is that I made something with logic board - shorted some element of cracked it. I can't say it with sure, because I was careful - and don't remember any problems. Anyway, I want to find what component on logic board is responsible for "closed lid" and to replace it. I'm searching for PB G4 DVI datasheet over internet for two weeks, but still've got nothing. Only thing, that I found - is the Service Manual with How-To-Disassemble-And-What-To-Change-If... :(

I'm sure, that my problem is stupid and silly - and I can fix it with a solder iron in two minutes... if I knew what to solder :) — Alexis Silent

PowerBook G4 Aluminum 12" 1-1.5 GHz

Inner screen and keyboard don't work

답변 1개

귀하의 답변을 추가하세요