Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

315 질문 전체 보기

Power Flex Cable Replacement Issue

So i seen the power flex on this ipad was bad, could see there was a tear. So i replaced with another and of course the adhesive on it is terrible nothing wanted to stick in place. So i used a bit of super glue. Now Iam not sure if this caused an issue or not. When i first got it all connected and in place, I tested Boom Ipad comes on No problem. Seal it all up. Nothing will not power on via the power button. Connected it to the power cord, comes up. I removed the power flex again and looked at the cable it does not look "damage" But i am wondering if the super glue could have damanged the flex?

Something else i can try?

Any suggestions are helpful


해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

I would order another power flex cable. Its clear that the cable is damaged if it is no longer working and power on when plugged in. Very easy thing to do while replacing the screens on these.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

mikebarkas 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 26