주요 콘텐츠로 건너뛰기

2011년 하반기 모델, A1278 / 2.4 GHz i5 또는 2.8GHz i7 프로세서.

591 질문 전체 보기

Why won't my battery charge

MB Looses power when running. Charging led is always on green. Changed charger, battery and DC-in board. When a charged battery is put in, it willl run (until battery is depleted). Any suggestions ?

Update (12/04/2016)

IDOR 7.518 is the given AHT mistake, a DC sensor, but what part on the mainboard escapes me. Any help towards that ? Thank you .

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

The following is the status now: any charged battery will be recognized and will start up the mbp . Without a battery and only the charger, the mbp will not start. When battery is in and charger connected, it works fine. Coconut states that the 60w charger is recognized, but the battery is not charged.

댓글 달기

답변 2개

선택된 답변

First let's get a better idea of your actual battery status. Please download and run Coconut Battery and let us know your results:

http://www.coconut-flavour.com/coconutba...

해당 답변은 도움이 되었습니까?

점수 5

댓글 4개:

Thumbs up to mayer

Will do, will have to find a charged battery first.

Coconut: Battery is fine, charger is 60 watts. Mac: battery not charging, powered by the charger / when charger is removed, Mac: powered by battery

Battery is not charged, drained empty, second battery, same result. Coconut recognizes the charger, but no charge flows into the battery. Also, wit no battery present, the charger alone won't power up the mbp or run it, when taking battery out.

댓글 달기

I haven't heard of this problem, it could be the Magsafe port and the connection to the motherboard that is causing it to believe that it is charging. Since you did change the battery and it is older any warranty would be voided, I would reach out to Apple for advice. Try completely powering it off and disconnecting the battery connection and then re-connecting. Reboot, and see if that changes anything. Maybe try another set of batteries? Hope this helps.

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

Had replaced the original battery with a brand new one (partially charged) worked fine. Replaced it with a third used battery, recharged from a friends PB, worked fine as well, until depleted.

So is the issue resolved?

I would listen to mayer's instructions. They have more knowledge of the problem than I do. Best of luck!

댓글 달기

귀하의 답변을 추가하세요

wolfgangschaefer 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 119