주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

122 질문 전체 보기

adhesive won't stick on new cable

I bought new volume cable but can't get the adhesive to stick. Any Advice?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Replace the existing adhesive on the housing or volume button cable itself with new adhesive?

I know that Tesa / Red transparent double sided tape works well for this.

의견 추가하세요

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

답변 2개

선택된 해법

It kind of depends on what part of the cable. For most of it, red tape is fine. The part that always gives me problems is where it goes from volume to power and is on top of the frame. I use yellow tape for that part. If the volume buttons are giving you trouble, cut out tiny little pieces of red tape.

I'm pretty sure all of those volume flexes were made when Reagan was in office. The adhesive is always messed up on them when I go to use them.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

Yes the tesa tape would work with this repair.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Brandon Ballington 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 30