Skip to main content

Formally called the Chevrolet C/K.

235 질문 전체 보기

Why dont my reverse lights work when I put it in reverse?

My reverse lights havent worked since i changed steering columns. So that i had tilt the other day i plugged in a trailer and they suddenly started working since i dont know where their activated from its hard to track down the problem

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

선택된 해법

Trikkidick West, since the reverse lights went out after changing column probable bad wire/plug connection at the park,neutral,reverse bulb switch which is attached to lower part of steering column. Strange thing is you say they are working now after plugging in trailer plug so you should also follow that harness and check for shorted/damaged wires, also make sure all grounds are clean and tight. Link below shows a diagram of switch on column, switch is #3 on diagram. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

해당 답변은 도움이 되었습니까?

점수 4
의견 추가하세요

귀하의 답변을 추가하십시오

Trikkidick West 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 22

전체 시간: 284