Use a display from the original Apple Watch for the Series 1?

Question

Apple 워치 - 오리지널

2014년 9월 9일에 발표된 이 기기는 Apple의 첫 번째 스마트 웨어러블 출시제품입니다. iFixit의 수리 설명서는 Apple 워치 (스틸) 및 Apple 워치 Sport (알루미늄)에 적용됩니다.

210 질문 전체 보기

Daniel @zide

평판: 127

3

게시일: 2016년 11월 24일

옵션

Use a display from the original Apple Watch for the Series 1?

Hey everyone.

I have recently broke my series 1 Apple Watch, and I am now looking for replacement Display-units. The device does still display things, just the glass is broken. I have found several ones, allthough they are all rather expensive. I just stumbled upon an auction for an original Apple Watch Display, which comes from the series 0 model. As its current price is relatively low, I'd like to bid as well.

I was wondering though: Is it possible to use the Display unit from an Apple Watch Series 0 for a Series 1? I does seem to have the same connectors, and I don't remember Apple mentioning any change of the Display when they issued the Series 1 Watch.

I would be really thankful for an answer to this problem, or at least some opinions.

Many thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 2

댓글 달기

답변 1개

선택된 답변

harrywoodward94 @harrywoodward94

평판: 49

4

게시일: 2016년 11월 24일

옵션

The display for the original Apple Watch and the series 1 can be interchanged as the only thing changed really was the processor speed. Ive also just doubled checked on here and both have the same screen/digitizer, Item Code: IF308-009

Hope this helps

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 4개:

Many thanks for your reply, I really couldn't find a way of figuring this out. I didn't know one could search for parts on here, but now I do.

Also by the way, do you know what the little cable on the back of a Watch display with the three small solder points does?

Thanks alot in advance

Daniel 의 2016년 11월 25일

The cable on the back with the 3 small solder points connects the power supply to the proximity sensor.

harrywoodward94 의 2016년 11월 26일

Wow, I did not know this. I am going to order a completely new display unit anyway, but is it possible to desolder that cable without damaging it? Just something I want to try.

Daniel 의 2016년 11월 27일

Yes it's possible to remove to cable without damaging it. Just apply a little heat to each point while slightly lifting the cable and it will come straight off (no need to apply any additional solder)

harrywoodward94 의 2016년 11월 27일

댓글 달기

Many thanks for your reply, I really couldn't find a way of figuring this out. I didn't know one could search for parts on here, but now I do.

Also by the way, do you know what the little cable on the back of a Watch display with the three small solder points does?

Thanks alot in advance — Daniel
The cable on the back with the 3 small solder points connects the power supply to the proximity sensor. — harrywoodward94
Wow, I did not know this. I am going to order a completely new display unit anyway, but is it possible to desolder that cable without damaging it? Just something I want to try. — Daniel
Yes it's possible to remove to cable without damaging it. Just apply a little heat to each point while slightly lifting the cable and it will come straight off (no need to apply any additional solder) — harrywoodward94

Apple 워치 - 오리지널

Use a display from the original Apple Watch for the Series 1?

답변 1개

귀하의 답변을 추가하세요