주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2682 질문 전체 보기

Stuck in DFU mode

son dropped his iPhone 6s, cracking the screen protector, and the screen. I just replaced the screen using the ifixit complete kit, and the original home button. Could not get the phone to power up. Downloaded newest iTunes and connected phone. iTunes believes phone is in DFU mode. Attempting to restore generates error 9. I have switched cables, and even using the Apple cable generates the same error.

During restore attempt, apple logo and progress bar appear on phone screen.

Holding power and home button then releasing and pressing power button does nothing.

Any help appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Use Reiboot it will get you out of DFU mode with a just one click Get it here

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

If this does not work OP unplug the battery and then keep the home button extension cable and front camera cable unplugged. It should still be in DFU mode when you attempt to turn it on (DFU mode is usually a black turned on screen probably it's a bit hard to tell).

Try restoring it and see if it succeeds. If it does then it's either the front camera ribbon cable is damaged or the home button extension cable / home button cable being damaged.

댓글 달기

귀하의 답변을 추가하세요

dhelvey 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,607