주요 콘텐츠로 건너뛰기

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 질문 전체 보기

torn ribbon cable on ipad (help!)

Block Image

i have been fixing iphones, ipods, ipads, etc for some time now. I mainly focus on screen repairs. While removing the glass from the ipad mini I tore a cable in the top right corner near the rear view camera. Been searching online to find out what i tore and cant seem to find it so I came here seeking help. I can see that there are 2 solder points on the ribbon cable and i'm very tempted to soldering it but figured i would find out what it is before doing it. Please help asap would be great. thank you. below is a picture of the torn cable.

i'm not sure what cable this is i have been searching online can't seem to find what it is. picture [IMG]http://i65.tinypic.com/2mr8f1c.png[/IMG]

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 3개

your pictures arn't loading try this

기존 질문에 이미지 추가하기

is that better sir? sorry @jimfixer

before i had the ipad on and the screen was unresponsive. that may have been becuase the screen wasnt plugged in along with the digitizer? idk @tomchai

댓글 달기

답변 1개

가장 유용한 답변

If it's connected through a RF connector, it's an antenna, either for GPS or for cellular.

If it's a ZIF connector, it's the prox sensor, which is only used to shunt RF TX power to satisfy SAR regulations, in other words, useless.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

So do you think i should solder it or just say f it and leave it? lol

@tomchai

댓글 달기

귀하의 답변을 추가하세요

omegaxprime98 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 494