평판: 13
1
1
hi i replaced screen on iphone 7 and after replacement iphone powers up, but there is no display
new lcd is fully working on other phone
lcd screen is genuine from another iphone 7
after connecting lcd connector didnt put any screws or metal plate on connectors for screen and home button ribbon
i used 2 screws and plate for front camera flex
phone is not in dfu mode
any help ??
좋은 질문 입니까?
평판: 593
6
3
Did plug off the battery during the installation? Otherwise your shorted your backlight circuit.
해당 답변은 도움이 되었습니까?
평판: 1.1k
5
2
well there are a number of possibilities but it sounds like one of the connection ports may be corrupted or bent. if the screen works on other phones then check to see if the connection ports on the phone that does not work look exactly the same as the one that does. hopefully it is just a bend that can be adjusted with tweezers. i hope that this helps you and good luck on your repair
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 3,305
댓글 1개
Your iphone light problem...... you need Check Hardware light Ways. i hope solve 100%
Free Mobile Solution 의