주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

iPhone 5 speaker not working after screen replacement

i repaired the screen on my iphone 5 myself and once it was installed the speaker sound was distorted. So i replaced the speaker with a new one but now there is no sound at all, whether i play music or get a phone call. The phone only vibrates. If i use headphones, the sound comes through. Any ideas what has caused this? and if it is repairable?

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Did you use gloves during the repair because the oil on your fingers on those gold connections can cause you some problems. Clean all the connector or gold parts with some alcohol, and put bad together. Also the iPhone 5 speakers are a little tricky you have to make sure that metal connected correctly so the metal points on your cable are touching the correct location of your speaker

해당 답변은 도움이 되었습니까?

점수 2

댓글 5개:

The gold contacts on the Lightning dock

You mean the metal connectors on the underside of the speaker? And the contact points that are, i believe, on the logic board?

Which cable has connector points for the speaker?

I didnt wear gloves

I'm not sure which speaker is being talked about because there are two speakers one is the earpiece speaker which is right at the top of the screen and the loudspeaker which is at the bottom right of the phone.

The earpiece speaker has gold connector springs which connect to some gold round connection points on the front camera ribbon / flex cable assembly.

And if the loudspeaker does not work then it may be that the charging port cable was ripped but this only happens if the charging port assembly was pried out.

Its the loudspeaker. I pulled it out again yesterday and cleaned the connectors but it still doesnt work...

Havent removed the charging port either :/

I say try another loud speaker as you said the original one became distorted then you tried an replacement one and that did not work at all which I think means bad replacement part.

댓글 달기

귀하의 답변을 추가하세요

lazireth 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 1,225