주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Error 4013 and error 9 on DFU Mode

Hi All,

I just bought a second hand iphone 5s and update the ios to 10.2. It works fine for almost a day and at the end of the day suddenly the device blank screen and what i did was reboot it as the screen are not coming back after i press power button to awake it. The device will never reboot and stuck at boot logo. Throw me a panic cpu 0 caller kernel panic once before stuck at itunes logo.

Tried to perform itunes restore but keep getting error 4013 on normal recovery mode and error 9 on DFU mode.

Tried to remove front screen assembly and back camera that someone from the answer here suggested but still unable to solve my issue. Any other parts might have cause this? Your suggestion of potential fix are appreciated.

Local device repairer told me might be the u2 flash issue and not worth for a fix as to replace the ic is expensive, is that true?

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

error 9 while in DFU mode means lost connection between PC and device.... I would try replacing the USB cable first... if the issue persists then it should be an issue related to U2, Q2 or Power Manager, depending on measures taken with multimeter along the related voltage lines... I don't know what your local repairer means for "not worth" to repair... Here in Malta where I operate we manage to fix these issues for a maximum 200eur expense... maybe it could be worth for you or not.... in my opinion when a repairer tells you "not worth" without quoting it's because he's not able to fix it... this to encourage you not to give up and search for alternative repairers.... good luck!

해당 답변은 도움이 되었습니까?

점수 0

댓글 5개:

Thanks for your suggestion, i did replace cable, and even use different pc and macbook to restore. Unfortunately the issue persist. Besides this do you think is it possible a faulty battery could cause the issue as i see some of the answer suggested battery might have caused the issue. Also if the u2 or q2 chip change, will it last long or it might easily happen again? Thanks

I would definitely try another battery first before thinking of U2 or Q2 chip change.

Yes definetely that will be my next try. Thanks

Tried with different battery... Too bas the error remains :(

I've noticed a lot of 4013 / iOS 10.X questions recently. U2 may fix this problem but it may not. Ask the repair shop if they work on a no fix/no fee basis to minimize your exposure to the costly "i think I can fix it" mentality.

댓글 달기

귀하의 답변을 추가하세요

voonwahwong 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 2,762