옵션

Horizontal bar appears on boot up screen - MacBook Pro Early 2011

I was fortunate enough to have the motherboard on my MacBook Pro Early 2011 replaced by Apple at no charge.

But after a week, I noticed a horizontal bar appears across the screen upon booting up. It only last for a few moments and doesn't appear again while I'm using the MacBook Pro.

I think there's a firmware upgrade I can do for the video card. I found a file on the Apple support page that would do just that.

I'm wondering if there is a way to check if all firmware upgrades have been done on this MacBook Pro or if anyone else has had a similar experience.

Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2017년 1월 2일

옵션

Here is the Apple T/N that gets into the firmware levels: About EFI and SMC firmware updates for Intel-based Mac computers. If you have Mavericks or newer the firmware levels are updated to still newer versions than whats listed here. Just make sure you've at the listed levels or newer.

As an example my 15" MacBook Pro early 2011 running El Capitan is:

Boot ROM Version: MBP81.0047.B2D
SMC Version (system): 1.69f1

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

MacBook Pro

Horizontal bar appears on boot up screen - MacBook Pro Early 2011

답변 1개

귀하의 답변을 추가하세요