주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2189 질문 전체 보기

White screen when phone turned on after volume button repair

I repair phones for a hobby and to make some extra cash.

I was replacing the silent/ vol button flex in an iphone 4s.

The flex is working (based off of vibrations).

However once i turned the phone on after repair I was met with a white screen. The screens still usable, and everything else seems fine.

Did I screw the LCD somehow? Not sure how..

I've tried reconnecting the display ribbon cables, pushing them firmly and even brushing them with an anti static brush.

Do I've to suck it up and buy a replacement screen?

Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

from what it sounds like you could have possibly damaged the ribbon cable. if you have a nother iphone 4 then try to hook the screen up to that one and also try a different screen on the phone to narrow down whether it is the screen or the phone. that is all i can tell you on that. i hope that this helps and that the problem is just something simple. otherwise you may have to fork over the 20-30 for a new screen.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Damhan Richardson 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 48