Hi,
Please help me.
My pebble time round meet error fe504504.
I already refered to pebble manual and try to factory reset by press some buttons but the situation no change.
I think that may be my pebble has problem with hardware (Flash, memory, etc i'm not sure)
Could you please give me some advise in advance?
P/s: I can fix hardware by my self but I don't know where do I start in this case.
Thanks,
Duy
좋은 질문 입니까?
평판: 103
3
Hey I don't know if you've seen this already but this is from Pebble's site and seems legit. I'd avoid opening it if you can - I know mine gets pretty wet and it would suck to trade off one thing for another.
FE504502, FE504503, OR FE504504
These error code indicate issues which can often be resolved by restarting the watch from recovery mode.
To resolve the issue, please follow these steps:
Your watch may already be in Recovery Mode (pictured on right); if not, please press and hold the back, up, and select buttons at the same time.
Continue holding until your watch screen shows a screen similar to the one pictured here.
Open the Settings menu on your phone
Open Bluetooth under Settings and find any Pebble devices
Tap the icon to the right of the Pebble device(s) and forget them
Reopen your Pebble App and follow the prompts to reconnect your watch to your phone
If you continue to experience the issue, or have trouble executing the steps, please email order@pebble.com with the following
A summary of the issue, including a note that you’ve tried troubleshooting steps above
The serial number of the watch
A picture of the error on the screen of the watch
A picture of the back of your watch, with the serial number clearly shown
The model and color of your watch
Your phone number and shipping address (including your name, street address, city, region, country and postal code) in case we determine a replacement is appropriate
Source: https://help.getpebble.com/customer/en/p...
PS let me know if it works! I noticed you marked this as water damage and tbh if mine did that I'd think the same thing.
해당 답변은 도움이 되었습니까?
Hi Nico,
Thanks for your support but I already tried that tip before I post that question.
What I want to know is how to fix it by intercede to hảdware :((
Do you have any other advice in this case?
I'm sorry I really don't have an answer. I haven't attempted repairing any Pebble watches yet and don't know how to repair the hardware for them either yet besides what we could both find on the internet.
Just had the same error code show up on my time around tried pressing all three buttons on the right side at one and it didn't resolve my issue however I pressed all four buttons at the same time and that got rid of the code. Hope this helps someone out in the future!
24 시간 전: 3
7일 전: 8
30일 전: 21
전체 시간: 13,419
